A laser engraving machine is equipped with AI that can automatically identify the material and judge the engraving force with an accuracy of 98%Recently, an int...
Nov 01,2023 | Beatrice
A laser engraving machine is equipped with AI that can automatically identify the material and judge the engraving force with an accuracy of 98%
Recently, an interesting study was published:
With AI, the laser engraving machine can engrave on T-shirts made from mixed materials and automatically adjust the force to avoid cutting.
Their AI was installed on the existing laser engraving machine, which can automatically recognize 30 different cutting technology materials with an accuracy of up to 98%.
The tool will tell you not only what it is, but also how hard and fast you should cut/carve it.
If this is a dangerous material, laserpecker metal engraving please be careful.
As a result, there is no risk of human error (especially if the material is not mislabeled), and the cutting force will not damage the material.
Which of the following three transparent plastic materials would be suitable for making a protective mask?
Brush a few times, the students' three analyses are clearly not in vain:
The right image shows polycarbonate, a dangerous material that cannot be cut (cutting can produce toxic flames);
The middle is cast propylene, which can be cut with a laser but cannot be cleaned with alcohol;
A clear sheet of plastic acetate can be rinsed with warm water and mild soap or alcohol on the left.
Choose the leftmost lab mask. Accept and complete it as follows:
The SensiCut AI can also be used to analyze the debugging of laser engraving patterns in addition to these functions:
Using Sensicut, you can lay out six pieces of material at a time and it will match the pattern to the material. Enter the thickness of each piece of felt, and Sensicut will tell you that the felt is too thin, or that the pattern design is too complicated.
Before carving, you can make it bigger.
If you don't adjust as it says, it will be a hassle:
Moreover, laser-assisted engraving can also be performed on materials such as mobile phone cases and mixed-material clothing.
In addition, this is another strength, since the traditional Chinese method of studying laser engraving on composite structural materials requires data splitting and boundary alignment.
Did you find this feeling cut useful along the way?
Do bananas go well with probiotics?Probiotics are significant since they strengthen your immune system, maintain healthy dig...
The MET course of the Hong Kong Polytechnic University is a Master of Science course offered by the School of Design. Featur...
Hong Kong Polytechnic University ndergraduate background is not obvious
Let’s talk about the superior family background first. Children from superior families do not get good grades. This view is ...
Everyone has gone digital. If you haven t already, you ll be behind, but that s not a reason to fail. Fortunately, to join s...
By whom does Tesla get its raw materials?Instead than depending on a single lithium supplier, Tesla sources its lithium from...
Is the university Hang Seng good?As evidence of its recognition as a leader in sustainable education and responsible managem...
Is Bluetooth 2.4 or 5 GHz?Bluetooth uses 2.4 GHz. Bluetooth is a standard wireless communication4g Bluetooth protocol. It s ...
With the continuous development of the economy and society and the improvement of people s daily life service level, the foo...