The laser engraving machine is equipped with AI, which can automatically identify the material and judge the engraving force wit

The laser engraving machine is equipped with AI, laserpecker 12 which can automatically identify the material and judge the engraving force with 98% accuracyAn ...

Oct 30,2023 | Charlotte

The laser engraving machine is equipped with AI, laserpecker 12 which can automatically identify the material and judge the engraving force with 98% accuracy

An interesting study has just been published:

The laser engraving machine is equipped with AI, which can carve on the T-shirt of mixed materials and automatically change the force to ensure that it will not be cut.

They installed their own AI on the existing laser engraving machine, laserpecker metal engraving which can automatically recognize 30 different cutting technology materials with an accuracy of up to 98%.

It will tell you not only what it is, but also how hard and fast you need to cut/carve.

Of course, if this is a dangerous material, just throw a big "be careful" to you.

This way, there is no risk of human error (especially if the material is not mislabeled), such as toxic gases, and the cutting strength will not damage the material caused by the waste.

For example, in the face of the following three transparent plastic materials that look identical, which is suitable for making a protective mask?

Give it to the AI! Brush a few times, the students three analysis is clearly not in vain:

On the right is polycarbonate, a dangerous material that cannot be cut (cutting can produce toxic flames);

In the middle is cast propylene, can be cut with laser, can not be wiped with alcohol;

On the far left is a clear sheet of plastic acetate that can be rinsed with warm water and mild soap or alcohol.

For a lab mask, of course, choose the leftmost one. Accept and complete it:

GIF cover

In addition to these system functions described above, the SensiCut AI can also be used to analyze the debugging of laser engraving patterns:

Lay out six pieces of material at a time, and it will match the pattern to the material. Enter the thickness of each piece of felt and Sensicut will immediately tell you that the felt is too thin and the pattern design is too complicated.

Then you can make it bigger before carving.

It will be a drag if you don't adjust as it says:

In addition, it is also possible to perform laser-assisted engraving of patterns on materials such as mobile phone cases and clothes with mixed materials.

This is also another strong point of it, because the traditional Chinese method of studying laser engraving on composite structural materials requires data splitting and boundary alignment of their own design problems, which is very troublesome.

Along the way, did you find this feeling cut useful

laserpecker laser engraving machine